DC MOTOR PUMP GROUP 1
Common Description
Consisting of the heavy duty DC motor along with the CB1S gear pump, this pump motor group is an excellent hydraulic power unit for mobile hydraulic equipments, such as auto carriers, mobile aerial lifts, and backup programs.
DC MOTOR PUMP GROUP two
General Description
This motor pump consists of 4.5″ DC motor, a CBSR gear pump with built-in relief valve and check valve.
DC MOTOR PUMP GROUP 3
Standard Description
This motor pump includes a four.5″ DC motor as well as a CBSR gear pump which has a standard power up/gravity down circuit with a relief valve, a check valve in addition to a solenoid release valve.
Particular Notes
1. This energy unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
2. Clean the many hydraulic components concerned prior to mounting the power unit.
3. Viscosity in the hydraulic oil shoud be 15~68 cst, which should also be clean and free of impurities. N46 hydraulic oil is proposed.
four. The power unit must be mounted horizontally.
five. The relief valve pressure is preset about 25% increased than the working strain.
6. Flow control valve for lowing speed adjustment is available unpon request.