Material Managing Electrical power UNIT one
This power unit is created for the fork lift market, consisting of very effective gear pump, DC motor, guide increase and decrease valve, tank, ect. The up and down movement are controlled from the lever of the guide release valve, that is outfitted with an electric switch to activate the motor. The lowing speed is managed through the stress compensated flow control valve.
1. The duty of this power unit is S3, i.e. thirty seconds on and 270 senconds off.
two. Clean the many hydraulic elements concerned before set up of the power unit.
3. Viscosity from the hydraulic oil shoud be 15~46 cst, which should also be clean and free of charge of impurities, N46 hydraulic oil is recommended .
four. Oil altering is required after the preliminary 100 operation hours, afterwards as soon as each and every 3000 hours.
5. The electrical power unit proven is made to be mounted horizontally.
Material Dealing with Power UNIT two
This energy unit features energy up gravity down circuit. Activate the start out solenoid to start out the motor to lift the machine. The lowing motion is activated from the solenoid valve together with the lowering speed managed by the pressure compensated movement control valve. Merchandise of this series may be extensively used in the sector of logistic products for instance fork lift, mini lift table, etc.
1. The duty of this electrical power unit is S3,i.e.,30 seconds on and 270 senconds off.
2. Clean all the hydraulic parts concerned ahead of mounting the electrical power unit.
3. Viscosity of the hydraulic oil shoud be 15~46 cst,which ought to also be clean and absolutely free of impurities, N46 hydraulic oil is advisable .
4. Oil altering is needed just after the preliminary one hundred operation hours,afterwards the moment just about every 3000 hrs.
five. The electrical power unit must be mounted horizontally.