Solitary reduction worm gearing offers high ratio reduction with few moving parts in a close-coupled small drive. The right angle arrangement of driving-to-driven machine takes a minimum of space. Input and output shafts can be extended in either or both directions in horizontal or vertical plans adaptable to any mounting requirement. Efficient electric motor speeds are decreased to slower speed requirements of many industrial machines in a single reduction.
Product Features
Ratios 5:1 to 70:1
Hollow & Solid Output Shafts
Vertical & Horizontal Mounting
Fan Cooled (Standard)
Motor Mounts (C-Encounter Adapters or Scoops)
Cast Iron or Steel Housings
Products
The exclusive utilization of the involute Helicoid Thread form (with departing side contact) on the worm and gear provides for high efficiencies, and long service life. The hardened ground and polished alloy metal worm develops a even, work hardened surface on the bronze equipment. For this reason worm gears use in and improve with prolonged service while additional gears are deteriorating. Ever-Power offers a wide selection of model configurations, sizes, ratios, and accessories from our standard products.
Fabricated Designs
If the application involves severe shock loads or feasible housing damage from external sources (as in steel mills or mobile apparatus applications) Ever-Power can provide fabricated steel housings with up to 48″ center distances. Fabricated housings provide maximum rigidity and strength that allows the tranny of higher horsepower amounts than are feasible with standard cast iron products. Extra heavy side plates connect the worm and equipment shaft bearing supports, assuring correct meshing of the apparatus under all load conditions. In smaller sizes, fabricated steel reducers are interchangeable with Ever-Power regular cast iron reducers.
Custom Designs
Ever-Power can offer custom swiftness and reversed engineered reducers for the application, be it a fresh project or a primary drop-in replacement for a competitor’s acceleration reducer. Fabricated steel reducers enable Ever-Power to match a competitor’s footprint, centerline, and shaft elevation allowing a primary drop-in substitute saving the client time and money.
Long – Quiet Life
All worm gears in Ever-Power reducers are manufactured from phosphorous bronze. Our style also incorporates a hardened, surface and polished alloy metal worm. This mixture develops a smooth, work-hardened mating surface area of the bronze equipment which increases with prolonged service.
Worm gearing is a class of equipment reducers that utilizes correct angle, nonintersecting shafts. This form of reducer provides easy and quiet procedure and allows for the probability of large swiftness reductions. These gears are available from share in a wide variety of ratios, from only 4:1 to as much as 3600:1. The small design and structure allows worm equipment reducers to be positioned in a comparatively small space. Thus, very high reductions in a restricted package size can be achieved with this configuration. Our worm gear features the continuous sliding tooth actions between worm and one’s teeth. This escalates the tolerance for heavy loads and shock loads. Worm gear drives offer users high reducing capacity for relatively low cost in comparison with various other types of gearing.
The use of worm gearing extends across many industries including food, beverage and grain and has many applications. Some applications that use worm gearing are: conveyors, mixers and bucket elevators.
Ever-Power worm equipment reducer gearbox series base on years of encounters uses designed teeth surface with unsurpassed worm gear speed reducer torque transfer performance with great functionality, efficency and cost.Worm gear system transmits power through sliding contact, resulting in extremely low vibration , sound, small backlash and self-locking property
-Housing:Onetime we casting creats great rigidity for severe impacts. Outer cooling fins and inner lubrication essential oil diversion channel style to increase heat dissipation.
-Worm Shaft: Manufactured with Carbon alloyed Steel S45C or SCM415, precison machined and carburized to HRC45 or HRC60, after that for precision tooth grinding to ensure maximum contacting.
-Worm Wheel: Manufactured with Carbon alloy ALBC2, teeth are machined by precision CNC hobbing machine to sustain high impact.
A worm equipment reducer is one kind of reduction gear box which contains a worm pinion insight, an output worm gear, and includes a right angle result orientation. This type of reduction gear package is normally used to take a rated motor quickness and create a low speed output with higher torque worth based on the decrease ratio. They often can resolve space-saving problems because the worm equipment reducer is among the sleekest reduction gearboxes available because of the small diameter of its result gear.
worm gear reducerWorm gear reducers are also a popular type of swiftness reducer because they offer the greatest speed decrease in the smallest package. With a high ratio of speed decrease and high torque result multiplier, it’s unsurprising that many power transmission systems utilize a worm gear reducer. Some of the most typical applications for worm gears are available in tuning instruments, medical examining equipment, elevators, security gates, and conveyor belts.
SW-1 and SW-5
Torque Transmission offers two sizes of worm gear reducer, the SW-1 and the SW-5 and both can be found in a variety of ratios. The SW-1 ratios include 3.5:1 to 60:1 and the SW-5 ratios include 5:1 to 100:1. Both these options are produced with rugged compression-molded glass-fill polyester housings for a durable, long lasting, light weight speed reducer that is also compact, noncorrosive, and nonmetallic.
Features
Our worm equipment reducers offer an option of a good or hollow result shaft and show an adjustable mounting position. Both the SW-1 and the SW-5, however, can withstand shock loading much better than other reduction gearbox styles, making them perfect for demanding applications.
Rugged compression-molded glass-fill polyester housing
Light weight and compact
Non corrosive
Non metallic
Range of ratios
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Grease Lubrication
Solid or Hollow output shaft
Adjustable mounting position
Worm Equipment Reducers also known as worm gearbox or worm velocity reducers. Worm equipment reducers are used for speed reduction and increasing the torque for electric powered electric motor drives. You can choose to attach your NEMA electric motor to the reducer by using the NEMA C encounter flange or use a coupling. If you want a coupling for the output or input shaft discover our coupling section for selecting a coupling. We offer four assemblies left hand and right hands and double output shaft and shaft insight and shaft output. Interchangeable with the majority of worm gear manufactures. Discover data sheet in item overview for diamensions. Unless you see your type, please Contact Us.
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Design for OEM Replacement
Double Bearings Applied to Both Shaft Ends
Anti-Rust Primer Applied Outside and inside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Metal Shafts
Flange Mount Models for 56C and 145TC Motors
Ever-Power DDVM series triple-reduction worm gear velocity reducers can be found in ratios from 5000:1 to 175,000:1 and middle distances from 7” to 20” (larger sizes available on request). Result torque ranges from 33,000 in pounds. for the 7” CD DDVM-70 to 582,900 in lbs for the DDVM-200. Mechanical HP insight requirements are from 0.09 HP for the 175,000:1 7 in CD reducer to 6.25 HP for the 5000:1 20” CD unit. These reducers are available in four configurations: horizontal, vertical, shafted, and shaft mounted.
These reducers are perfect for water/waste-water products drive applications such as thickeners and clarifiers, which require a vertical down shaft. Other obtainable configurations also make Ever-Power triple decrease reducers perfect for use on mixers, elevators, solar panels, astronomical telescopes, indexing tables, hoists, conveyors, or additional process or materials handling systems where large torques/sluggish speeds are needed.
These reducers are also offered with a helical main reduction stage and so are termed the HDVM series
Product Features
Ratios 5000:1 to 175,000:1
HP from 0.09 to 6.25.
Output Torque to 583,000 in lbs.
Output RPM only 0.01 with a 1750 RPM input.
Ideal for ultra-slow acceleration, high torque applications
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Design for OEM Replacement
Double Bearings Applied to Both Shaft Ends
Anti-Rust Primer Applied Outside and inside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Steel Shafts
Flange Mount Versions for 56C and 145TC Motors
Description
The HDR Series worm equipment reducers are used in low to moderate horsepower applications to reduce speeds and increase torque. Worm gear reducers are available in direct or indirect drive, direct drive models are 56C or 145TC flange install with either right, still left or dual output shafts or a hollow bore result. The indirect drive models are shaft input-shaft result boxes for use with sprocket or pulley drive systems. They provide an effective low priced solution to speed reduction and increased torque, with higher tolerances for shock loading than helical gear reducers.
In order to decide on a gearbox speed reducer, you will have to determine the required torque and program factor for the application form. Click on “Specs” above for a desk that will assist in identifying the service element. For service elements above 1.0, multiply the mandatory torque by the support factor.
Our regular 700 Series – the heart of Ever-Power velocity reducer products – has been serving industry reliably for over 40 years. Its proven modular style has set the sector standard for performance and is the most imitated product in the current worm gear swiftness reducer marketplace. But why accept a knock-off when you’re able to have the initial – from Ever-Power.
Specifications
11 basic solitary reduction sizes
8 basic dual reduction sizes
1/6 – 25 HP
5:1 – 100:1 ratios single reduction
100:1 – 3600:1 ratios double reduction
Non-flanged, NEMA C-face quill, and coupled input styles
Projecting and hollow output shafts
Projecting diameters from 1/2″ to 2-1/4″
Hollow result bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in stock)
Product Features
The 700 Series’ huge oil reservoir provides efficient heat dissipation and lubrication for longer operating lifestyle.
Its multi-position mounting versatility permits installation in virtually any position.
Housings are straddle-milled, best and bottom, for precise alignment of horizontal and vertical bases.
Internal baffles assure positive, leak-free venting.
The 700 Series’ rugged casing, fabricated of fine-grained, gear-quality cast iron, provides optimum strength for optimum durability, as well as greater precision during worm and gear alignment.
Ever-Power 700 Series high-strength bronze worm equipment is straddle mounted between heavy-duty tapered roller bearings to improve thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel result shaft assures capacity for high torque and overhung loads.
Pipe plugs allow easy fill up, level, and drain in virtually any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal existence.
Both 2D and 3D CAD drawings are available in our eCatalog.
TheIncreased Quality! Industrial Ranked! Inexpensive!One-piece gearcase, without external ribs, is made from close-grained cast iron and for rigid gear and bearing support. In addition, it offers excellent warmth dissipation.Dual lip, spring-loaded seals guard against oil leakage and stop dirt from entering.Stepped shafts with oversized ball andtapered roller bearings.Carbon metal shafts for greater power.High tensile strength cast bronze worm wheel and hardened and surface alloy steel worm made intregal with the shaft for lengthy and trouble-free life.Oil sight gauge for simple maintenance (not available on sizes 25 and 34).Factory oil packed.Every device test run just before shipment.Universal installation with bolt-on feet.Highly modifiable design.All this at substantially reduced prices than you have already been accustomed to spending money on reducers of lesser quality. Less